English
Deutsch
日本語
Polska
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीstepper motor wind turbine Modelo de impresión 3D
stl max max x_t step
adriancubas
Engineering
- Formatos disponibles: 3DS MAX: max 504.10 kbParasolid: x_t 272.92 kbSTEP: step 348.72 kbStereolithography: stl 2.15 MB
- Colección:No
- Listo para Imprimir:
- 3D Scan:No
- Para adultos:No
- PBR:No
- Vistas:3394
- Fecha: 2020-11-18
- ID de artículo:322054
- Valoración:
solidworks software (2017) was used for modeling.
in this project, the modeling of the parts for the construction of a small wind turbine was carried out. the propellers come from pvc pipes of 110mm in diameter and 4mm in thickness.
these propellers are attached to a 3a 1.8 degrees per step nema 23 stepper motor.
the propellers can be folded forward for easy portability. the two pairs of wires coming from the stepper motor carry alternating current and must be rectified and filtered to convert it to dc. this project is based on the results obtained in my instructables project:
https://www.instructables.com/portable-savonius-wind-turbine-with-deflectors/
in this instructable a stepper motor was also used as an electrical generator.
files can be 3d printed. abs or petg filaments are recommended.
Leer másin this project, the modeling of the parts for the construction of a small wind turbine was carried out. the propellers come from pvc pipes of 110mm in diameter and 4mm in thickness.
these propellers are attached to a 3a 1.8 degrees per step nema 23 stepper motor.
the propellers can be folded forward for easy portability. the two pairs of wires coming from the stepper motor carry alternating current and must be rectified and filtered to convert it to dc. this project is based on the results obtained in my instructables project:
https://www.instructables.com/portable-savonius-wind-turbine-with-deflectors/
in this instructable a stepper motor was also used as an electrical generator.
files can be 3d printed. abs or petg filaments are recommended.
¿Necesita más formatos?
Si precisa un formato distinto, por favor, abra una consulta de Soporte y solicítelo. Podemos convertir modelos 3D a: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nosotros no convertimos escenas 3d y formatos como .step, .iges, .stp, .sldprt.!
Si precisa un formato distinto, por favor, abra una consulta de Soporte y solicítelo. Podemos convertir modelos 3D a: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nosotros no convertimos escenas 3d y formatos como .step, .iges, .stp, .sldprt.!
Descargar stepper motor wind turbine Modelo de impresión 3D max x_t step stl De adriancubas
wind turbine stepper motorNo hay comentarios sobre este artículo.
Artículos relacionados De stepper motor wind turbine
stl
1965usman
Engineering
