English
Deutsch
日本語
Polska
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीLowPoly-BT361 Low-poly Modelo 3D
- Formatos disponibles: Autodesk FBX: fbx 10.52 MB
- Polígonos:62,490
- Vértices:37,448
- Animados:No
- Texturas:
- Articulados:No
- Materiales:
- Low-poly:
- Colección:No
- Mapas UVW:No
- Plugins Usados:No
- Listo para Imprimir:No
- 3D Scan:No
- Para adultos:No
- PBR:No
- Geometría:Polygonal
- Desenvolver UVs:Unknown
- Vistas:1597
- Fecha: 2022-04-26
- ID de artículo:395553
- Valoración:
there is a blend format
The BT361A-01 machine, which was built according to an unusual scheme, was distinguished by a characteristic layout. It was based on two medium-sized tracked trolleys. The crew cabin and engine compartment were fixed on the body of the front trolley. They were shifted forward, as a result of which the engine compartment casing protruded noticeably forward relative to the chassis. Behind the cab, near the center of the front trolley, there was a support with a hinge for installing a cargo platform. Its second support was placed in the center of the rear trolley. The rear trolley was similar in design to the front one, but differed in the composition of the units. The trolleys were connected to each other using a simple joint assembly. Listo para Imprimir: No
Leer másThe BT361A-01 machine, which was built according to an unusual scheme, was distinguished by a characteristic layout. It was based on two medium-sized tracked trolleys. The crew cabin and engine compartment were fixed on the body of the front trolley. They were shifted forward, as a result of which the engine compartment casing protruded noticeably forward relative to the chassis. Behind the cab, near the center of the front trolley, there was a support with a hinge for installing a cargo platform. Its second support was placed in the center of the rear trolley. The rear trolley was similar in design to the front one, but differed in the composition of the units. The trolleys were connected to each other using a simple joint assembly. Listo para Imprimir: No
¿Necesita más formatos?
Si precisa un formato distinto, por favor, abra una consulta de Soporte y solicítelo. Podemos convertir modelos 3D a: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nosotros no convertimos escenas 3d y formatos como .step, .iges, .stp, .sldprt.!
Si precisa un formato distinto, por favor, abra una consulta de Soporte y solicítelo. Podemos convertir modelos 3D a: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nosotros no convertimos escenas 3d y formatos como .step, .iges, .stp, .sldprt.!
