Grenade G-12 from the Helldivers 2 Modelo de impresión 3D

A big grenade for a big beetle.
Detailed grenade g-12 from the game Helldivers 2.The Dimensions correspond to those in the game.

Model dimensions:
- length – 200 mm
- height – 99 mm
- width – 96 mm

The model consists of:

Ver1 - grenade g-12 not divided into parts
Ver2 - neutrona wand into 11 parts for printing

The grenade G-12 is divided so that individual parts can be printed with plastic of the same color as the part.

The part name indicates the color of the part.
The grenade G-12 is divided into smaller STL parts for printing on press tables with a print area width of less than 200 mm.

The grenade G-12 is fully ready for simple 3D printing on FDM, SLS and SLA printers.

Separately, taking into account printing on printers with a small print area. But you can split it yourself as you need. The model file is attached in one piece.

In order for the safety lever to gly off when the ring is pulled out, it is necessary to use two 6x3 neodymium magnets.

But if you are interested in developing this project let me know. I am always happy to receive new suggestions and ideas!

Formats: .OBJ .STL .SAT .STEP .XB .XT .IGS .SLDPRT

Have a good build and enjoy the model!