drive propeller Low-poly Modelo 3D

$20.00 -30%
$14.00
Licencia: Licencia básica
drive propeller Modelo 3D
$20.00 -30%
$ 14.00
¡Quitar esto! Marcar este artículo
  • Formatos disponibles:
    Hypershot: bip 538.04 kb
    Collada: dae 421.59 kb
    Autodesk FBX: fbx 386.51 kb
    Wavefront OBJ: obj 480.12 kb
    Stereolithography: stl 248.53 kb
    3DS MAX all ver.: 3ds 280.75 kb
  • Animados:
    No
  • Texturas:
    No
  • Articulados:
    No
  • Materiales:
  • Low-poly:
  • Colección:
    No
  • Mapas UVW:
    No
  • Plugins Usados:
    No
  • Listo para Imprimir:
    No
  • 3D Scan:
    No
  • Para adultos:
    No
  • PBR:
    No
  • Geometría:
    Polygonal
  • Desenvolver UVs:
    Unknown
  • Vistas:
    2304
  • Fecha:
  • ID de artículo:
    383754
  • Valoración:
a propeller is a device with a rotating hub and radiating blades that are set at a pitch to form a helical spiral, that, when rotated, exerts linear thrust upon a working fluid, such as water or air. propellers are used to pump fluid through a pipe or duct, or to create thrust to propel a boat through water or an aircraft through air. the blades are specially shaped so that their rotational motion through the fluid causes a pressure difference between the two surfaces of the blade by bernoulli's principle which exerts force on the fluid. most marine propellers are screw propellers with helical blades rotating on a propeller shaft with an approximately horizontal axis. Listo para Imprimir: No
¿Necesita más formatos?
Si precisa un formato distinto, por favor, abra una consulta de Soporte y solicítelo. Podemos convertir modelos 3D a: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nosotros no convertimos escenas 3d y formatos como .step, .iges, .stp, .sldprt.!
Leer más

Descargar drive propeller Modelo 3D bip dae fbx obj stl 3ds De Norezero

propeller watercraft propulsion ship boat yacht twinscrew shaft
No hay comentarios sobre este artículo.